Gosund Smart LED Light Bulb WB4

Gosund Smart LED Light Bulb WB4

Work with Alexa and Google Assistant
DIY colors and 8 scenes
Sync to music
APP remote control
Brightness adjustment
Group control
Energy saving & long lifetime


Base Type: E26/E27/B22
Power Rating: 8W
Blade Color: RGB+W
Lumen: 800lm
Color Temperature: 2700K/4500K/6500K
Wi-Fi: 2.4GHz(only)

Product Description

Gosund Smart Light Bulbs, Color Changing Dimmable LED WiFi Bulbs Work with Alexa and Google Home, RGB Multicolor and Warm White A19 E26 75W Equivalent Bulbs, 2.4GHz WiFi Only, No Hub Required

 

Product Features

  • Voice Control: Gosund Smart bulbs that work with Alexa and Google Home. Just give a simple voice command such as" Hi Alexa, turn on the floor lamp" ; "Hi Alexa, set the light to blue". Perfect for times when your hands are full or in a dark room.
  • Remote Control: Manage your smart light bulbs via phone App. You can check the power status of each light bulb and control the bulbs anywhere, no need to worry about leaving home and forgetting to turn off the lights. Only for 2.4Ghz WiFi. No hub required.
  • Multicolor & Warm White: Dimmable 16 million colors and warm white (2700K). Set your desired colors and brightness to create different ambience for party, dating, relaxing and other occasions via phone App.
  • Timer & Schedule: Create a schedule for your lights which follows your daily routine. Whenever the lights off, you know it’s time to go to bed. You can also set a countdown to turn on lights at a specific time to prepare a surprise atmosphere.
  • Energy Saving: The smart Led bulbs are equipped with E26 bulb base, 8W equivalent to 75W brightness. Saving consumption up to 80% without losing brightness or color quality. Lifespan of our smart bulbs can approximately last 20,000 hours.

Gosund Smart LED Light Bulb WB4 Works with Alexa and Google Home

With Led technology, Gosund smart wifi bulbs reduce consumption by up to 80% without losing brightness or quality.

 

  • Wattage: 8W
  • Color: Warm White + RGB
  • Size: A19 E26
  • Voltage: 120V
  • Luminous Flux: 800 lm
  • Wi-Fi Network: 2.4Ghz(only)

 

Gosund Smart LED Light Bulb WB4 There are 8 scene modes

Control your home from anywhere

Enjoy your smart home!

Confused in the using of smart bulb?

Forget the manual switch once pairing successfully.

Gosund Smart bulbs could work according to App and Voice Command. Clap the switch after well-connecting, that may cause the bulbs to blink and getting into pairing mode after turning on.

Skills for Smart bulb always keep good connection.

Several routers may be needed in building a really smart home system, especially for a big house and many smart devices. Enough routers will make a good connection and reduce dropping wifi for too crowded and far distance.

Q1:Why my bulbs are blinking?

The bulb starts blinking indicating that it is in pairing mode and ready for installation. Turn on/off via manual switch may result in a flash. Once connected to the wifi, forget the manual switch, and control the light by App and Voice.

Q2:Why my smart bulbs buzzing?

Smart bulbs need full voltage to be supplied to them. Buzzing is often caused by the less voltage, for example

-Using dimmers to change the brightness

-Turn on the larger appliance(microwaves)

-Home voltage changes.

Additionally, LED bulbs are known to generate a little“buzz”, but the noise level should not be noticeable from a distance of over 3 feet by FCC regulations.